dmesg - Temp test for GPU

Return To Temp test for GPU System Information

Linux version 5.6.4-1-default (geeko@buildhost) (gcc version 9.3.1 20200406 [revision 6db837a5288ee3ca5ec504fbd5a765817e556ac2] (SUSE Linux)) #1 SMP Mon Apr 13 18:13:21 UTC 2020 (e42da4f)
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000009d81fff] usable
BIOS-e820: [mem 0x0000000009d82000-0x0000000009ffffff] reserved
BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
BIOS-e820: [mem 0x000000000a200000-0x000000000a20bfff] ACPI NVS
BIOS-e820: [mem 0x000000000a20c000-0x000000000affffff] usable
BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
BIOS-e820: [mem 0x000000000b020000-0x00000000db515fff] usable
BIOS-e820: [mem 0x00000000db516000-0x00000000db65ffff] reserved
BIOS-e820: [mem 0x00000000db660000-0x00000000db7e0fff] usable
BIOS-e820: [mem 0x00000000db7e1000-0x00000000dbbf2fff] ACPI NVS
BIOS-e820: [mem 0x00000000dbbf3000-0x00000000dcaeffff] reserved
BIOS-e820: [mem 0x00000000dcaf0000-0x00000000deffffff] usable
BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000041f37ffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Micro-Star International Co., Ltd. MS-7B79/X470 GAMING PRO MAX (MS-7B79), BIOS M.40 11/06/2019
tsc: Fast TSC calibration failed
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x41f380 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF write-through
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask FFFF80000000 write-back
  1 base 000080000000 mask FFFFC0000000 write-back
  2 base 0000C0000000 mask FFFFE0000000 write-back
  3 base 0000DC020000 mask FFFFFFFF0000 uncachable
  4 disabled
  5 disabled
  6 disabled
  7 disabled
TOM2: 0000000420000000 aka 16896M
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
e820: update [mem 0xdc020000-0xdc02ffff] usable ==> reserved
e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
last_pfn = 0xdf000 max_arch_pfn = 0x400000000
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
BRK [0x2c4201000, 0x2c4201fff] PGTABLE
BRK [0x2c4202000, 0x2c4202fff] PGTABLE
BRK [0x2c4203000, 0x2c4203fff] PGTABLE
BRK [0x2c4204000, 0x2c4204fff] PGTABLE
BRK [0x2c4205000, 0x2c4205fff] PGTABLE
BRK [0x2c4206000, 0x2c4206fff] PGTABLE
BRK [0x2c4207000, 0x2c4207fff] PGTABLE
BRK [0x2c4208000, 0x2c4208fff] PGTABLE
BRK [0x2c4209000, 0x2c4209fff] PGTABLE
BRK [0x2c420a000, 0x2c420afff] PGTABLE
BRK [0x2c420b000, 0x2c420bfff] PGTABLE
BRK [0x2c420c000, 0x2c420cfff] PGTABLE
RAMDISK: [mem 0x354b1000-0x36a4ffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F05A0 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000DBB70098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x00000000DBB77E30 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x00000000DBB701E8 007C46 (v02 ALASKA A M I    01072009 INTL 20120913)
ACPI: FACS 0x00000000DBBDCE00 000040
ACPI: APIC 0x00000000DBB77F48 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x00000000DBB780A8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x00000000DBB780F0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SSDT 0x00000000DBB78190 0000C8 (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
ACPI: SSDT 0x00000000DBB78258 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
ACPI: SSDT 0x00000000DBB80EF0 003676 (v01 AMD    AMD AOD  00000001 INTL 20120913)
ACPI: MCFG 0x00000000DBB84568 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: HPET 0x00000000DBB845A8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
ACPI: UEFI 0x00000000DBB845E0 000042 (v01 ALASKA A M I    00000002      01000013)
ACPI: IVRS 0x00000000DBB84628 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
ACPI: PCCT 0x00000000DBB846F8 00006E (v01 AMD    AMD PCCT 00000001 AMD  00000000)
ACPI: SSDT 0x00000000DBB84768 002F29 (v01 AMD    AMD CPU  00000001 AMD  00000001)
ACPI: CRAT 0x00000000DBB87698 000B58 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
ACPI: CDIT 0x00000000DBB881F0 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
ACPI: SSDT 0x00000000DBB88220 001D4A (v01 AMD    AmdTable 00000001 INTL 20120913)
ACPI: SSDT 0x00000000DBB89F70 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
ACPI: WSMT 0x00000000DBB8A030 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000041f37ffff]
NODE_DATA(0) allocated [mem 0x41f36a000-0x41f37ffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000041f37ffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009cfff]
  node   0: [mem 0x0000000000100000-0x0000000009d81fff]
  node   0: [mem 0x000000000a000000-0x000000000a1fffff]
  node   0: [mem 0x000000000a20c000-0x000000000affffff]
  node   0: [mem 0x000000000b020000-0x00000000db515fff]
  node   0: [mem 0x00000000db660000-0x00000000db7e0fff]
  node   0: [mem 0x00000000dcaf0000-0x00000000deffffff]
  node   0: [mem 0x0000000100000000-0x000000041f37ffff]
Zeroed struct page in unavailable ranges: 13287 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000041f37ffff]
On node 0 totalpages: 4181017
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3996 pages, LIFO batch:0
  DMA32 zone: 14116 pages used for memmap
  DMA32 zone: 903421 pages, LIFO batch:63
  Normal zone: 51150 pages used for memmap
  Normal zone: 3273600 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 13, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 14, version 33, address 0xfec01000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x10228201 base: 0xfed00000
smpboot: Allowing 32 CPUs, 20 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x09d82000-0x09ffffff]
PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20bfff]
PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
PM: hibernation: Registered nosave memory: [mem 0xdb516000-0xdb65ffff]
PM: hibernation: Registered nosave memory: [mem 0xdb7e1000-0xdbbf2fff]
PM: hibernation: Registered nosave memory: [mem 0xdbbf3000-0xdcaeffff]
PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32 nr_node_ids:1
percpu: Embedded 59 pages/cpu s204800 r8192 d28672 u262144
pcpu-alloc: s204800 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
Built 1 zonelists, mobility grouping on.  Total pages: 4115666
Policy zone: Normal
printk: log_buf_len individual max cpu contribution: 32768 bytes
printk: log_buf_len total cpu_extra contributions: 1015808 bytes
printk: log_buf_len min size: 262144 bytes
printk: log_buf_len: 2097152 bytes
printk: early log buf free: 250092(95%)
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
mem auto-init: stack:off, heap alloc:off, heap free:off
Memory: 3672980K/16724068K available (12291K kernel code, 1597K rwdata, 4456K rodata, 2052K init, 12908K bss, 425656K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x26/0x3f0 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
ftrace: allocating 39870 entries in 156 pages
ftrace: allocated 156 pages with 4 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU event tracing is enabled.
rcu: 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=32.
	Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS: 33024, nr_irqs: 1224, preallocated irqs: 16
random: crng done (trusting CPU's manufacturer)
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20200110
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
APIC: Switch to symmetric I/O mode setup
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 3600.037 MHz processor
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e4767be31, max_idle_ns: 440795374465 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.07 BogoMIPS (lpj=14400148)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
AppArmor: AppArmor initialized
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
x86/cpu: User Mode Instruction Prevention (UMIP) activated
LVT offset 1 assigned for vector 0xf9
LVT offset 2 assigned for vector 0xf4
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full AMD retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Freeing SMP alternatives memory: 36K
smpboot: CPU0: AMD Ryzen 5 3600 6-Core Processor (family: 0x17, model: 0x71, stepping: 0x0)
Performance Events: Fam17h+ core perfctr, AMD PMU driver.
... version:                0
... bit width:              48
... generic registers:      6
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   0
... event mask:             000000000000003f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
smp: Brought up 1 node, 12 CPUs
smpboot: Max logical packages: 3
smpboot: Total of 12 processors activated (86400.88 BogoMIPS)
node 0 initialised, 3156358 pages in 24ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20bfff] (49152 bytes)
PM: Registering ACPI NVS region [mem 0xdb7e1000-0xdbbf2fff] (4268032 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 08:03:05, date: 2020-04-25
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1587801785.192:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 7 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [1022:1480] type 00 class 0x060000
pci 0000:00:00.2: [1022:1481] type 00 class 0x080600
pci 0000:00:01.0: [1022:1482] type 00 class 0x060000
pci 0000:00:01.3: [1022:1483] type 01 class 0x060400
pci 0000:00:01.3: enabling Extended Tags
pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.0: [1022:1482] type 00 class 0x060000
pci 0000:00:03.1: [1022:1483] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [1022:1482] type 00 class 0x060000
pci 0000:00:05.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.0: [1022:1482] type 00 class 0x060000
pci 0000:00:07.1: [1022:1484] type 01 class 0x060400
pci 0000:00:07.1: enabling Extended Tags
pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.0: [1022:1482] type 00 class 0x060000
pci 0000:00:08.1: [1022:1484] type 01 class 0x060400
pci 0000:00:08.1: enabling Extended Tags
pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
pci 0000:00:08.2: [1022:1484] type 01 class 0x060400
pci 0000:00:08.2: enabling Extended Tags
pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
pci 0000:00:08.3: [1022:1484] type 01 class 0x060400
pci 0000:00:08.3: enabling Extended Tags
pci 0000:00:08.3: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
pci 0000:00:18.0: [1022:1440] type 00 class 0x060000
pci 0000:00:18.1: [1022:1441] type 00 class 0x060000
pci 0000:00:18.2: [1022:1442] type 00 class 0x060000
pci 0000:00:18.3: [1022:1443] type 00 class 0x060000
pci 0000:00:18.4: [1022:1444] type 00 class 0x060000
pci 0000:00:18.5: [1022:1445] type 00 class 0x060000
pci 0000:00:18.6: [1022:1446] type 00 class 0x060000
pci 0000:00:18.7: [1022:1447] type 00 class 0x060000
pci 0000:03:00.0: [1022:43d0] type 00 class 0x0c0330
pci 0000:03:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
pci 0000:03:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
pci 0000:03:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:03:00.1: PME# supported from D3hot D3cold
pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
pci 0000:03:00.2: enabling Extended Tags
pci 0000:03:00.2: PME# supported from D3hot D3cold
pci 0000:00:01.3: PCI bridge to [bus 03-26]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:00.0: enabling Extended Tags
pci 0000:20:00.0: PME# supported from D3hot D3cold
pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:01.0: enabling Extended Tags
pci 0000:20:01.0: PME# supported from D3hot D3cold
pci 0000:20:02.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:02.0: enabling Extended Tags
pci 0000:20:02.0: PME# supported from D3hot D3cold
pci 0000:20:03.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:03.0: enabling Extended Tags
pci 0000:20:03.0: PME# supported from D3hot D3cold
pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:04.0: enabling Extended Tags
pci 0000:20:04.0: PME# supported from D3hot D3cold
pci 0000:20:08.0: [1022:43c7] type 01 class 0x060400
pci 0000:20:08.0: enabling Extended Tags
pci 0000:20:08.0: PME# supported from D3hot D3cold
pci 0000:03:00.2: PCI bridge to [bus 20-26]
pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:03:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:22:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:22:00.0: reg 0x10: [io  0xf000-0xf0ff]
pci 0000:22:00.0: reg 0x18: [mem 0xfcb04000-0xfcb04fff 64bit]
pci 0000:22:00.0: reg 0x20: [mem 0xfcb00000-0xfcb03fff 64bit]
pci 0000:22:00.0: supports D1 D2
pci 0000:22:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:20:01.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:03.0: PCI bridge to [bus 24]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:26:00.0: [1b21:1242] type 00 class 0x0c0330
pci 0000:26:00.0: reg 0x10: [mem 0xfca00000-0xfca07fff 64bit]
pci 0000:26:00.0: enabling Extended Tags
pci 0000:20:08.0: PCI bridge to [bus 26]
pci 0000:20:08.0:   bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:27:00.0: [1002:67df] type 00 class 0x030000
pci 0000:27:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:27:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
pci 0000:27:00.0: reg 0x20: [io  0xe000-0xe0ff]
pci 0000:27:00.0: reg 0x24: [mem 0xfcf00000-0xfcf3ffff]
pci 0000:27:00.0: reg 0x30: [mem 0xfcf40000-0xfcf5ffff pref]
pci 0000:27:00.0: supports D1 D2
pci 0000:27:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:27:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:27:00.1: reg 0x10: [mem 0xfcf60000-0xfcf63fff 64bit]
pci 0000:27:00.1: supports D1 D2
pci 0000:00:03.1: PCI bridge to [bus 27]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:28:00.0: [1022:148a] type 00 class 0x130000
pci 0000:28:00.0: enabling Extended Tags
pci 0000:00:07.1: PCI bridge to [bus 28]
pci 0000:29:00.0: [1022:1485] type 00 class 0x130000
pci 0000:29:00.0: enabling Extended Tags
pci 0000:29:00.1: [1022:1486] type 00 class 0x108000
pci 0000:29:00.1: reg 0x18: [mem 0xfc800000-0xfc8fffff]
pci 0000:29:00.1: reg 0x24: [mem 0xfc908000-0xfc909fff]
pci 0000:29:00.1: enabling Extended Tags
pci 0000:29:00.3: [1022:149c] type 00 class 0x0c0330
pci 0000:29:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
pci 0000:29:00.3: enabling Extended Tags
pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
pci 0000:29:00.4: [1022:1487] type 00 class 0x040300
pci 0000:29:00.4: reg 0x10: [mem 0xfc900000-0xfc907fff]
pci 0000:29:00.4: enabling Extended Tags
pci 0000:29:00.4: PME# supported from D0 D3hot D3cold
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
pci 0000:30:00.0: [1022:7901] type 00 class 0x010601
pci 0000:30:00.0: reg 0x24: [mem 0xfce00000-0xfce007ff]
pci 0000:30:00.0: enabling Extended Tags
pci 0000:30:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.2: PCI bridge to [bus 30]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:31:00.0: [1022:7901] type 00 class 0x010601
pci 0000:31:00.0: reg 0x24: [mem 0xfcd00000-0xfcd007ff]
pci 0000:31:00.0: enabling Extended Tags
pci 0000:31:00.0: PME# supported from D3hot D3cold
pci 0000:00:08.3: PCI bridge to [bus 31]
pci 0000:00:08.3:   bridge window [mem 0xfcd00000-0xfcdfffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
iommu: Default domain type: Passthrough 
pci 0000:27:00.0: vgaarb: setting as boot VGA device
pci 0000:27:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:27:00.0: vgaarb: bridge control possible
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
e820: reserve RAM buffer [mem 0x09d82000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
e820: reserve RAM buffer [mem 0xdb516000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb7e1000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
e820: reserve RAM buffer [mem 0x41f380000-0x41fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfd000000-0xfd0fffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0a00-0x0a0f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x040b] has been reserved
system 00:06: [io  0x04d6] has been reserved
system 00:06: [io  0x0c00-0x0c01] has been reserved
system 00:06: [io  0x0c14] has been reserved
system 00:06: [io  0x0c50-0x0c51] has been reserved
system 00:06: [io  0x0c52] has been reserved
system 00:06: [io  0x0c6c] has been reserved
system 00:06: [io  0x0c6f] has been reserved
system 00:06: [io  0x0cd0-0x0cd1] has been reserved
system 00:06: [io  0x0cd2-0x0cd3] has been reserved
system 00:06: [io  0x0cd4-0x0cd5] has been reserved
system 00:06: [io  0x0cd6-0x0cd7] has been reserved
system 00:06: [io  0x0cd8-0x0cdf] has been reserved
system 00:06: [io  0x0800-0x089f] has been reserved
system 00:06: [io  0x0b00-0x0b0f] has been reserved
system 00:06: [io  0x0b20-0x0b3f] has been reserved
system 00:06: [io  0x0900-0x090f] has been reserved
system 00:06: [io  0x0910-0x091f] has been reserved
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfec01000-0xfec01fff] could not be reserved
system 00:06: [mem 0xfedc0000-0xfedc0fff] has been reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [mem 0xfed80000-0xfed8ffff] could not be reserved
system 00:06: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:20:00.0: PCI bridge to [bus 21]
pci 0000:20:01.0: PCI bridge to [bus 22]
pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
pci 0000:20:01.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:03.0: PCI bridge to [bus 24]
pci 0000:20:04.0: PCI bridge to [bus 25]
pci 0000:20:08.0: PCI bridge to [bus 26]
pci 0000:20:08.0:   bridge window [mem 0xfca00000-0xfcafffff]
pci 0000:03:00.2: PCI bridge to [bus 20-26]
pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
pci 0000:03:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
pci 0000:00:01.3: PCI bridge to [bus 03-26]
pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
pci 0000:00:03.1: PCI bridge to [bus 27]
pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:03.1:   bridge window [mem 0xfcf00000-0xfcffffff]
pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
pci 0000:00:07.1: PCI bridge to [bus 28]
pci 0000:00:08.1: PCI bridge to [bus 29]
pci 0000:00:08.1:   bridge window [mem 0xfc700000-0xfc9fffff]
pci 0000:00:08.2: PCI bridge to [bus 30]
pci 0000:00:08.2:   bridge window [mem 0xfce00000-0xfcefffff]
pci 0000:00:08.3: PCI bridge to [bus 31]
pci 0000:00:08.3:   bridge window [mem 0xfcd00000-0xfcdfffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfccfffff]
pci_bus 0000:20: resource 0 [io  0xf000-0xffff]
pci_bus 0000:20: resource 1 [mem 0xfca00000-0xfcbfffff]
pci_bus 0000:22: resource 0 [io  0xf000-0xffff]
pci_bus 0000:22: resource 1 [mem 0xfcb00000-0xfcbfffff]
pci_bus 0000:26: resource 1 [mem 0xfca00000-0xfcafffff]
pci_bus 0000:27: resource 0 [io  0xe000-0xefff]
pci_bus 0000:27: resource 1 [mem 0xfcf00000-0xfcffffff]
pci_bus 0000:27: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
pci_bus 0000:29: resource 1 [mem 0xfc700000-0xfc9fffff]
pci_bus 0000:30: resource 1 [mem 0xfce00000-0xfcefffff]
pci_bus 0000:31: resource 1 [mem 0xfcd00000-0xfcdfffff]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:27:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:27:00.1: D0 power state depends on 0000:27:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 22140K
pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
pci 0000:00:01.0: Adding to iommu group 0
pci 0000:00:01.3: Adding to iommu group 1
pci 0000:00:02.0: Adding to iommu group 2
pci 0000:00:03.0: Adding to iommu group 3
pci 0000:00:03.1: Adding to iommu group 4
pci 0000:00:04.0: Adding to iommu group 5
pci 0000:00:05.0: Adding to iommu group 6
pci 0000:00:07.0: Adding to iommu group 7
pci 0000:00:07.1: Adding to iommu group 8
pci 0000:00:08.0: Adding to iommu group 9
pci 0000:00:08.1: Adding to iommu group 10
pci 0000:00:08.2: Adding to iommu group 11
pci 0000:00:08.3: Adding to iommu group 12
pci 0000:00:14.0: Adding to iommu group 13
pci 0000:00:14.3: Adding to iommu group 13
pci 0000:00:18.0: Adding to iommu group 14
pci 0000:00:18.1: Adding to iommu group 14
pci 0000:00:18.2: Adding to iommu group 14
pci 0000:00:18.3: Adding to iommu group 14
pci 0000:00:18.4: Adding to iommu group 14
pci 0000:00:18.5: Adding to iommu group 14
pci 0000:00:18.6: Adding to iommu group 14
pci 0000:00:18.7: Adding to iommu group 14
pci 0000:03:00.0: Adding to iommu group 15
pci 0000:03:00.1: Adding to iommu group 15
pci 0000:03:00.2: Adding to iommu group 15
pci 0000:20:00.0: Adding to iommu group 15
pci 0000:20:01.0: Adding to iommu group 15
pci 0000:20:02.0: Adding to iommu group 15
pci 0000:20:03.0: Adding to iommu group 15
pci 0000:20:04.0: Adding to iommu group 15
pci 0000:20:08.0: Adding to iommu group 15
pci 0000:22:00.0: Adding to iommu group 15
pci 0000:26:00.0: Adding to iommu group 15
pci 0000:27:00.0: Adding to iommu group 16
pci 0000:27:00.1: Adding to iommu group 16
pci 0000:28:00.0: Adding to iommu group 17
pci 0000:29:00.0: Adding to iommu group 18
pci 0000:29:00.1: Adding to iommu group 19
pci 0000:29:00.3: Adding to iommu group 20
pci 0000:29:00.4: Adding to iommu group 21
pci 0000:30:00.0: Adding to iommu group 22
pci 0000:31:00.0: Adding to iommu group 23
pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
pci 0000:00:00.2: AMD-Vi: Extended features (0x58f77ef22294ade):
 PPR X2APIC NX GT IA GA PC GA_vAPIC
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Virtual APIC enabled
AMD-Vi: X2APIC enabled
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xd7516000-0xdb516000] (64MB)
amd_uncore: AMD NB counters detected
amd_uncore: AMD LLC counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000003ff)
perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=37 max_order=22 bucket_order=0
zbud: loaded
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:07.1: AER: enabled with IRQ 30
pcieport 0000:00:08.1: AER: enabled with IRQ 31
pcieport 0000:00:08.2: AER: enabled with IRQ 32
pcieport 0000:00:08.3: AER: enabled with IRQ 33
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0x0000000038f6a701, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
Monitor-Mwait will be used to enter C-1 state
ACPI: \_PR_.C000: Found 2 idle states
ACPI: \_PR_.C002: Found 2 idle states
ACPI: \_PR_.C004: Found 2 idle states
ACPI: \_PR_.C006: Found 2 idle states
ACPI: \_PR_.C008: Found 2 idle states
ACPI: \_PR_.C00A: Found 2 idle states
ACPI: \_PR_.C001: Found 2 idle states
ACPI: \_PR_.C003: Found 2 idle states
ACPI: \_PR_.C005: Found 2 idle states
ACPI: \_PR_.C007: Found 2 idle states
ACPI: \_PR_.C009: Found 2 idle states
ACPI: \_PR_.C00B: Found 2 idle states
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
ahci 0000:03:00.1: version 3.0
ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
scsi host6: ahci
scsi host7: ahci
ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 42
ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 42
ata3: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80200 irq 42
ata4: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80280 irq 42
ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 42
ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 42
ata7: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80400 irq 42
ata8: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80480 irq 42
ahci 0000:30:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:30:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host8: ahci
ata9: SATA max UDMA/133 abar m2048@0xfce00000 port 0xfce00100 irq 44
ahci 0000:31:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:31:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
scsi host9: ahci
ata10: SATA max UDMA/133 abar m2048@0xfcd00000 port 0xfcd00100 irq 46
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: registered as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
RAS: Correctable Errors collector initialized.
microcode: CPU0: patch_level=0x08701013
microcode: CPU1: patch_level=0x08701013
microcode: CPU2: patch_level=0x08701013
microcode: CPU3: patch_level=0x08701013
microcode: CPU4: patch_level=0x08701013
microcode: CPU5: patch_level=0x08701013
microcode: CPU6: patch_level=0x08701013
microcode: CPU7: patch_level=0x08701013
microcode: CPU8: patch_level=0x08701013
microcode: CPU9: patch_level=0x08701013
microcode: CPU10: patch_level=0x08701013
microcode: CPU11: patch_level=0x08701013
microcode: Microcode Update Driver: v2.2.
resctrl: L3 allocation detected
resctrl: L3DATA allocation detected
resctrl: L3CODE allocation detected
resctrl: MB allocation detected
resctrl: L3 monitoring detected
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1244068243, -27995550)->(1250228189, -34155496)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'openSUSE Secure Boot Signkey: 0332fa9cbf0d88bf21924b0de82a09a54d5defc8'
zswap: loaded using pool lzo/zbud
page_owner is disabled
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 0:227:69
memory memory97: hash matches
rtc_cmos 00:02: setting system clock to 2020-04-25T08:03:07 UTC (1587801787)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: INTEL SSDSC2BP480G4, L2010420, max UDMA/133
ata1.00: 937703088 sectors, multi 1: LBA48 NCQ (depth 32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BP48 0420 PQ: 0 ANSI: 5
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
 sda: sda1 sda2 sda3
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3599.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
clocksource: Switched to clocksource tsc
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2.00: ATA-8: ST3000DM001-9YN166, CC4C, max UDMA/133
ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      ST3000DM001-9YN1 CC4C PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-7: ST3500630AS, 3.AAD, max UDMA/133
ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST3500630AS      D    PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdc: sdc1
sd 2:0:0:0: [sdc] Attached SCSI disk
ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata4.00: ATA-8: KINGSTON SH103S3120G, 521ABBF0, max UDMA/133
ata4.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access     ATA      KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
sd 3:0:0:0: [sdd] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 3:0:0:0: [sdd] Write Protect is off
sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdd: sdd1 sdd2 < sdd5 sdd6 >
sd 3:0:0:0: [sdd] Attached SCSI disk
ata5: SATA link down (SStatus 0 SControl 330)
ata6: SATA link down (SStatus 0 SControl 330)
ata7: SATA link down (SStatus 0 SControl 330)
ata8: SATA link down (SStatus 0 SControl 330)
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2052K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 1688K
Run /init as init process
  with arguments:
    /init
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=/boot/vmlinuz-5.6.4-1-default
    splash=silent
systemd[1]: systemd +suse.83.gc5aa158173 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Running in initial RAM disk.
systemd[1]: Set hostname to .
systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Reached target Timers.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Sockets.
systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
alua: device handler registered
emc: device handler registered
rdac: device handler registered
device-mapper: uevent: version 1.0.3
systemd[1]: Starting Setup Virtual Console...
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Load Kernel Modules.
systemd[1]: systemd-vconsole-setup.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: systemd-vconsole-setup.service: Failed with result 'exit-code'.
systemd[1]: Failed to start Setup Virtual Console.
systemd[1]: Dependency failed for dracut ask for additional cmdline parameters.
systemd[1]: dracut-cmdline-ask.service: Job dracut-cmdline-ask.service/start failed with result 'dependency'.
systemd[1]: Started Journal Service.
acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel 
raid6: avx2x4   gen() 36286 MB/s
xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb1: SerialNumber: 0000:03:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 14 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb2: SerialNumber: 0000:03:00.0
hub 2-0:1.0: USB hub found
raid6: avx2x4   xor()  8268 MB/s
hub 2-0:1.0: 8 ports detected
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 3
raid6: avx2x2   gen() 37406 MB/s
[drm] amdgpu kernel modesetting enabled.
Parsing CRAT table with 1 nodes
Ignoring ACPI CRAT on non-APU system
Virtual CRAT table created for CPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add CPU node
Finished initializing topology
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb0: switching to amdgpudrmfb from VESA VGA
xhci_hcd 0000:26:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
Console: switching to colour dummy device 80x25
amdgpu 0000:27:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67DF 0x1043:0x0525 0xE7).
[drm] register mmio base: 0xFCF00000
[drm] register mmio size: 262144
[drm] add ip block number 0 
[drm] add ip block number 1 
[drm] add ip block number 2 
[drm] add ip block number 3 
[drm] add ip block number 4 
[drm] add ip block number 5 
[drm] add ip block number 6 
[drm] add ip block number 7 
[drm] add ip block number 8 
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb3: SerialNumber: 0000:26:00.0
hub 3-0:1.0: USB hub found
raid6: avx2x2   xor() 24041 MB/s
amdgpu 0000:27:00.0: No more image in the PCI ROM
hub 3-0:1.0: 2 ports detected
ATOM BIOS: 115-D009PI2-101
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
xhci_hcd 0000:26:00.0: xHCI Host Controller
xhci_hcd 0000:26:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:26:00.0: Host supports USB 3.1 Enhanced SuperSpeed
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb4: SerialNumber: 0000:26:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 5
xhci_hcd 0000:29:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000410
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb5: SerialNumber: 0000:29:00.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
xhci_hcd 0000:29:00.3: xHCI Host Controller
xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 6
xhci_hcd 0000:29:00.3: Host supports USB 3.1 Enhanced SuperSpeed
usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 5.6.4-1-default xhci-hcd
usb usb6: SerialNumber: 0000:29:00.3
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
amdgpu 0000:27:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
amdgpu 0000:27:00.0: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 256bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 8164206 KiB
[TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] amdgpu: 4096M of VRAM memory ready
[drm] amdgpu: 4096M of GTT memory ready.
[drm] GART: num cpu pages 65536, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F4007E9000).
[drm] Chained IB support enabled!
PM: Image not found (code -22)
amdgpu: [powerplay] hwmgr_sw_init smu backed is polaris10_smu
[drm] Found UVD firmware Version: 1.130 Family ID: 16
[drm] Found VCE firmware Version: 53.26 Binary ID: 3
raid6: avx2x1   gen() 33024 MB/s
[drm] DM_PPLIB: values for Engine clock
[drm] DM_PPLIB:	 300000
[drm] DM_PPLIB:	 600000
[drm] DM_PPLIB:	 900000
[drm] DM_PPLIB:	 1162000
[drm] DM_PPLIB:	 1233000
[drm] DM_PPLIB:	 1275000
[drm] DM_PPLIB:	 1319000
[drm] DM_PPLIB:	 1360000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB:    engine_max_clock: 136000
[drm] DM_PPLIB:    memory_max_clock: 175000
[drm] DM_PPLIB:    level           : 8
[drm] DM_PPLIB: values for Memory clock
[drm] DM_PPLIB:	 300000
[drm] DM_PPLIB:	 1000000
[drm] DM_PPLIB:	 1750000
[drm] DM_PPLIB: Validation clocks:
[drm] DM_PPLIB:    engine_max_clock: 136000
[drm] DM_PPLIB:    memory_max_clock: 175000
[drm] DM_PPLIB:    level           : 8
[drm] Display Core initialized with v3.2.69!
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
raid6: avx2x1   xor() 18251 MB/s
[drm] UVD and UVD ENC initialized successfully.
raid6: sse2x4   gen() 18498 MB/s
usb 1-13: new full-speed USB device number 2 using xhci_hcd
[drm] VCE initialized successfully.
kfd kfd: Allocated 3969056 bytes on gart
Virtual CRAT table created for GPU
Parsing CRAT table with 1 nodes
Creating topology SYSFS entries
Topology: Add dGPU node [0x67df:0x1002]
kfd kfd: added device 1002:67df
[drm] fb mappable at 0xE0D19000
[drm] vram apper at 0xE0000000
[drm] size 8294400
[drm] fb depth is 24
[drm]    pitch is 7680
fbcon: amdgpudrmfb (fb0) is primary device
raid6: sse2x4   xor()  9753 MB/s
Console: switching to colour frame buffer device 240x67
amdgpu 0000:27:00.0: fb0: amdgpudrmfb frame buffer device
usb 5-1: new high-speed USB device number 2 using xhci_hcd
raid6: sse2x2   gen() 17994 MB/s
usb 5-1: New USB device found, idVendor=1235, idProduct=8210, bcdDevice= 5.ff
usb 5-1: New USB device strings: Mfr=1, Product=3, SerialNumber=2
usb 5-1: Product: Scarlett 2i2 USB
usb 5-1: Manufacturer: Focusrite
usb 5-1: SerialNumber: Y83PKR8981E232
usb-storage 5-1:1.4: USB Mass Storage device detected
scsi host10: usb-storage 5-1:1.4
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
raid6: sse2x2   xor() 12284 MB/s
raid6: sse2x1   gen() 13937 MB/s
usb 5-2: new high-speed USB device number 3 using xhci_hcd
usb 1-13: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-13: Product: USB Receiver
usb 1-13: Manufacturer: Logitech
raid6: sse2x1   xor()  9280 MB/s
raid6: using algorithm avx2x2 gen() 37406 MB/s
raid6: .... xor() 24041 MB/s, rmw enabled
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function   avx       
[drm] Initialized amdgpu 3.36.0 20150101 for 0000:27:00.0 on minor 0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:046D:C52B.0001/input/input0
Btrfs loaded, crc32c=crc32c-intel, assert=on
BTRFS: device fsid b0e05a41-370a-4b2b-869b-a754b16ed39d devid 1 transid 32315 /dev/sda1 scanned by systemd-udevd (405)
BTRFS: device label ISOTASKU devid 1 transid 10930 /dev/sdb1 scanned by systemd-udevd (439)
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:03:00.0-13/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0002/input/input1
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0002/input/input2
BTRFS info (device sda1): disk space caching is enabled
BTRFS info (device sda1): has skinny extents
usb 5-2: New USB device found, idVendor=046d, idProduct=0990, bcdDevice= 0.07
usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
usb 5-2: SerialNumber: A85261F0
BTRFS info (device sda1): enabling ssd optimizations
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.1/0003:046D:C52B.0002/input/input3
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:03:00.0-13/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-13/input2
usb 5-3: new full-speed USB device number 4 using xhci_hcd
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:03:00.0-13/input2
usb 5-3: New USB device found, idVendor=0b05, idProduct=17cb, bcdDevice= 1.12
usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-3: Product: BCM20702A0
usb 5-3: Manufacturer: Broadcom Corp
usb 5-3: SerialNumber: 5CF37067B09A
input: Logitech Unifying Device. Wireless PID:408a Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:408A.0004/input/input5
input: Logitech Unifying Device. Wireless PID:408a Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:408A.0004/input/input6
input: Logitech Unifying Device. Wireless PID:408a Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:408A.0004/input/input7
input: Logitech Unifying Device. Wireless PID:408a System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:408A.0004/input/input8
hid-generic 0003:046D:408A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Unifying Device. Wireless PID:408a] on usb-0000:03:00.0-13/input2:1
input: Logitech Unifying Device. Wireless PID:406d Mouse as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input12
hid-generic 0003:046D:406D.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:406d] on usb-0000:03:00.0-13/input2:2
usb 5-4: new full-speed USB device number 5 using xhci_hcd
systemd-journald[310]: Received SIGTERM from PID 1 (systemd).
systemd[1]: systemd +suse.83.gc5aa158173 running in system mode. (+PAM -AUDIT +SELINUX -IMA +APPARMOR -SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: /usr/lib/systemd/system/display-manager.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/displaymanager.pid \xe2\x86\x92 /run/displaymanager.pid; please update the unit file accordingly.
systemd[1]: /usr/lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm \xe2\x86\x92 /run/pcscd/pcscd.comm; please update the unit file accordingly.
scsi 10:0:0:0: Direct-Access     Scarlett Welcome Disk     0.10 PQ: 0 ANSI: 2
scsi 10:0:0:0: alua: supports implicit and explicit TPGS
scsi 10:0:0:0: alua: No target port descriptors found
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sde] 384 512-byte logical blocks: (197 kB/192 KiB)
sd 10:0:0:0: [sde] Write Protect is on
sd 10:0:0:0: [sde] Mode Sense: 04 00 90 00
sd 10:0:0:0: [sde] No Caching mode page found
sd 10:0:0:0: [sde] Assuming drive cache: write through
 sde: sde1
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
sd 10:0:0:0: [sde] Attached SCSI removable disk
systemd[1]: haveged.service: Main process exited, code=exited, status=1/FAILURE
systemd[1]: haveged.service: Failed with result 'exit-code'.
systemd[1]: initrd-switch-root.service: Succeeded.
systemd[1]: Stopped Switch Root.
systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Stopped target Switch Root.
systemd[1]: Stopped target Initrd File Systems.
systemd[1]: Stopped target Initrd Root File System.
systemd[1]: Reached target Slices.
systemd[1]: Reached target System Time Set.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: plymouth-start.service: Succeeded.
systemd[1]: Stopped Show Plymouth Boot Screen.
systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: systemd-fsck-root.service: Succeeded.
systemd[1]: Stopped File System Check on Root Device.
systemd[1]: Stopped Journal Service.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: sysroot.mount: Succeeded.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Load Kernel Modules.
BTRFS info (device sda1): disk space caching is enabled
systemd[1]: Condition check resulted in FUSE Control File System being skipped.
systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in First Boot Wizard being skipped.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Create System Users being skipped.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Apply Kernel Variables.
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
Adding 16777212k swap on /dev/sda2.  Priority:-2 extents:1 across:16777212k SSFS
systemd[1]: Reached target Swap.
systemd[1]: Finished Setup Virtual Console.
systemd[1]: Finished udev Coldplug all Devices.
systemd[1]: Started Journal Service.
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input16
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input17
acpi_cpufreq: overriding BIOS provided _PSD data
ACPI: Power Button [PWRF]
parport_pc 00:04: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP]
ccp 0000:29:00.1: ccp: unable to access the device: you might be running a broken BIOS.
input: PC Speaker as /devices/platform/pcspkr/input/input18
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
cryptd: max_cpu_qlen set to 1000
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
sp5100-tco sp5100-tco: Watchdog hardware is disabled
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
libphy: r8169: probed
r8169 0000:22:00.0 eth0: RTL8168h/8111h, 00:d8:61:d7:14:64, XID 541, IRQ 70
r8169 0000:22:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
snd_hda_intel 0000:27:00.1: Force to non-snoop mode
snd_hda_intel 0000:27:00.1: bound 0000:27:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input19
r8169 0000:22:00.0 enp34s0: renamed from eth0
ppdev: user-space parallel port driver
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC1D0:    inputs:
snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input20
input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input25
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input21
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input22
input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input26
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
SVM: Virtual VMLOAD VMSAVE supported
SVM: Virtual GIF supported
MCE: In-kernel MCE decoding enabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input23
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:27:00.1/sound/card0/input24
input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input27
input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input28
input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input29
input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input30
input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:29:00.4/sound/card1/input31
input: Logitech MX Keys as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:408A.0004/input/input32
logitech-hidpp-device 0003:046D:408A.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Keys] on usb-0000:03:00.0-13/input2:1
BTRFS: device fsid b71474e6-33e0-4d27-a3b8-a8eedadeb342 devid 1 transid 204608 /dev/dm-0 scanned by systemd-udevd (626)
input: Logitech M705 as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.2/0003:046D:C52B.0003/0003:046D:406D.0005/input/input33
logitech-hidpp-device 0003:046D:406D.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M705] on usb-0000:03:00.0-13/input2:2
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
BTRFS info (device dm-0): disk space caching is enabled
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
SGI XFS with ACLs, security attributes, quota, no debug enabled
XFS (sda3): Mounting V5 Filesystem
XFS (sda3): Ending clean mount
xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
BTRFS critical (device dm-0): corrupt leaf: root=1 block=114738921472 slot=38, invalid root item size, have 239 expect 439
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
EDAC amd64: F17h_M70h detected (node 0).
EDAC amd64: Node 0: DRAM ECC disabled.
BTRFS info (device sdb1): disk space caching is enabled
BTRFS critical (device sdb1): corrupt leaf: root=1 block=422686720 slot=26, invalid root item size, have 239 expect 439
systemd-journald[600]: Received client request to flush runtime journal.
nct6775: Found NCT6795D or compatible chip at 0x4e:0xa20
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 3599991669 Hz
vboxdrv: Successfully loaded version 6.1.6_SUSE (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
bpfilter: Loaded bpfilter_umh pid 1450
Started bpfilter
Generic FE-GE Realtek PHY r8169-2200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-2200:00, irq=IGNORE)
r8169 0000:22:00.0 enp34s0: Link is Down
logitech-hidpp-device 0003:046D:408A.0004: HID++ 4.5 device connected.
r8169 0000:22:00.0 enp34s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp34s0: link becomes ready
NET: Registered protocol family 17
usb 5-4: device descriptor read/64, error -110
fuse: init (API version 7.31)
logitech-hidpp-device 0003:046D:406D.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:406D.0005: multiplier = 8
usb 5-4: device descriptor read/64, error -110
usb 5-4: new full-speed USB device number 6 using xhci_hcd
usb 5-4: device descriptor read/64, error -110
usb 5-4: device descriptor read/64, error -110
usb usb5-port4: attempt power cycle
usb 5-4: new full-speed USB device number 7 using xhci_hcd
usb 5-4: device descriptor read/8, error -110
usb 5-4: device descriptor read/8, error -110
usb 5-4: new full-speed USB device number 8 using xhci_hcd
usb 5-4: device descriptor read/8, error -110
usb 5-4: device descriptor read/8, error -110
usb usb5-port4: unable to enumerate USB device
mc: Linux media interface: v0.10
videodev: Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device  (046d:0990)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
uvcvideo 5-2:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 10 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 12 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 8 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 11 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 9 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Extension 13 was not initialized!
uvcvideo 5-2:1.0: Entity type for entity Camera 1 was not initialized!
input: UVC Camera (046d:0990) as /devices/pci0000:00/0000:00:08.1/0000:29:00.3/usb5/5-2/5-2:1.0/input/input34
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM: features 0x07
sd 10:0:0:0: ioctl_internal_command return code = 8000002
sd 10:0:0:0: Sense Key : No Sense [current] 
sd 10:0:0:0: Add. Sense: Medium not present
Bluetooth: hci0: kaappi
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0b05-17cb.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0b05-17cb.hcd not found
NET: Registered protocol family 38
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
usb 5-2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong.
usb 5-2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1
usbcore: registered new interface driver snd-usb-audio
input: SB ROAR SR20A (AVRCP) as /devices/virtual/input/input35
process '@/usr/bin/grub2-mkrelpath' started with executable stack

Return To Temp test for GPU System Information